How do you reset a gas geyser?

Resetting a gas geyser typically involves relighting the pilot light, as the pilot light may go out due to various reasons such as a gust of wind, a disruption in the gas supply, or other factors. Here’s how you can reset a gas geyser by relighting the pilot light:

  1. Turn Off Gas Supply: Locate the gas shut-off valve on the gas line leading to the geyser and turn it to the “off” position to shut off the gas supply to the geyser.
  1. Wait for Gas to Disperse: Allow a few minutes for any remaining gas in the geyser to dissipate before attempting to relight the pilot light. This is important for safety to prevent the risk of a gas buildup.
  1. Access the Pilot Light: Depending on the model of your gas geyser, you may need to remove a cover or access panel to reach the pilot light assembly. Refer to the manufacturer’s instructions or user manual for guidance on accessing the pilot light.
  1. Locate the Pilot Light Assembly: Once you’ve accessed the pilot light assembly, locate the pilot burner and the pilot light control knob or button.
  1. Turn Pilot Light Control to “Pilot”: Turn the pilot light control knob or button to the “pilot” position. This allows gas to flow to the pilot burner.
  1. Press and Hold Pilot Light Ignition Button: While holding down the pilot light ignition button, use a long-reach lighter or match to ignite the pilot burner. Continue holding down the ignition button for a few moments to allow the pilot light to stabilize.
  1. Release Ignition Button: After the pilot light has ignited and remains lit, release the pilot light ignition button. The pilot light should continue burning steadily.
  1. Turn Pilot Light Control to “On”: Once the pilot light is lit and stable, turn the pilot light control knob or button to the “on” position to allow gas to flow to the main burner.
  1. Restore Gas Supply: Turn the gas shut-off valve back to the “on” position to restore the gas supply to the geyser.
  1. Test Geyser Operation: Turn on a hot water faucet or shower to verify that the geyser is producing hot water properly. Monitor the geyser for any signs of abnormal operation or issues.

If you encounter any difficulties relighting the pilot light or if the pilot light repeatedly goes out after relighting, it’s advisable to contact a qualified plumber or technician for further assistance and inspection.

Leave a Reply

Your email address will not be published. Required fields are marked *