Installing a geyser involves several steps to ensure safe and proper operation. It’s essential to follow manufacturer instructions and local building codes when installing a geyser. Here are general steps for installing an electric geyser:
- Select Location: Choose a suitable location for the geyser installation. The location should have sufficient space, proper ventilation, and easy access for maintenance. Avoid installing the geyser near flammable materials or in areas prone to water damage.
- Prepare Mounting Surface**: Ensure that the mounting surface is stable, level, and capable of supporting the weight of the geyser when filled with water. Use a stud finder to locate wall studs if wall mounting is required.
- Install Mounting Bracket: If wall mounting, install the mounting bracket securely to the wall studs using appropriate screws and anchors. Make sure the bracket is level and aligned correctly.
- Connect Water Supply: Shut off the main water supply to the house. Install a shut-off valve and pressure relief valve on the cold water inlet pipe near the geyser. Connect the cold water inlet pipe to the geyser’s cold water inlet using appropriate fittings and plumbing tape.
- Install Pressure Relief Valve: Install a pressure relief valve on the hot water outlet pipe to prevent excessive pressure buildup inside the geyser tank. Ensure the pressure relief valve is rated for the geyser’s pressure specifications and is installed according to manufacturer instructions.
- Connect Electrical Wiring: If the geyser is electric, connect the electrical wiring to the geyser according to manufacturer instructions and local electrical codes. Use appropriately sized wires, connectors, and junction boxes rated for the geyser’s electrical requirements.
- Secure Geyser: Install the geyser onto the mounting bracket or stand, ensuring that it is level and securely fastened. Follow manufacturer instructions for securing the geyser in place and ensuring proper clearance from surrounding walls or objects.
- Connect Drainage: Install a drain pipe or hose on the pressure relief valve to safely route hot water discharge away from the geyser and prevent water damage. Ensure the drain pipe is securely connected and routed to an appropriate drainage point.
- Turn On Water Supply: Turn on the main water supply to the house and check for leaks at all connections. Tighten fittings as needed to ensure a watertight seal.
- Test Geyser Operation: Fill the geyser tank with water and turn on the power supply (for electric geysers) or gas supply (for gas geysers). Test the geyser operation by running hot water at a faucet or tap. Check for proper heating and water flow, and adjust temperature settings as needed.
- Final Checks: Perform a final inspection of the geyser installation to ensure all connections are secure, and there are no leaks or safety hazards. Verify that the geyser is operating correctly and meets local building codes and regulations.
- User Instructions: Provide user instructions to the homeowner on operating the geyser safely and efficiently, including temperature settings, maintenance requirements, and safety precautions.
If you’re not familiar with plumbing or electrical work, it’s advisable to hire a qualified plumber or electrician to install the geyser to ensure proper installation and compliance with local regulations. Incorrect installation can lead to safety hazards, water damage, or voiding of warranty.